Home DSW.Profile Products QualityControl R&D Section Inquiry Managment OEM/ODM

Sliding Gate Operators,Automatic Sliding Door

The sliding gate operators are used to drive sliding gates for industrial, commercial and residential uses. The operators can be fitted with gear wheel or chain wheel according to your needs, and featured with powerful starting strength, capable of overwork at short time. In case of power failure, an emergency release key allows operate gate manually.

Sliding Gate Opener,gate opener manufacturer
Sliding gate

Sliding Gate Opener,gate opener manufacturer
Extension sliding gate

  • Gear-drive or chain-drive is optional
  • Magnetic or spring limit switch is optional
  • The self-locking electromechanical gear motor keeps the gate completely closed
  • Motor torque adjustment
  • Stop on closing if it hits obstruction
  • Overheat & Overload dual protection
  • Emergency release key in case of power failure
  • Control panel wiring are available to alarm lamp, remote controller, photocells, loop detector and IC card, etc.
  • Available in DC24V version, which can be operated by two storage batteries DC12V each.
  • ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
    Sliding Gate Operator SD-400

    Model:SD-400 Sliding Gate Operators

    Power:220/110V 50/60HZ
    Motor Power:250W
    Protection Level:54IP
    Max. Torque:14Nm
    Open Speed:12m/s
    Max Gate Weight:400-600kg
    Woring Temp:-20oC +50oC
    Insulation Class:1
    Work Cycle:70%

    User Mannual: SD-400
    Gear wheel & Magnetic limit switch 
    The self-locking gear motor
    Safety Obstruction Reverse (An infrared photocells must be installed)
    Overheat & Overload dual protection 
    Emergency release key in case of power failure
    Control panel wiring are available to alarm lamp, remote control, photocells, loop detector, IC card.
    Inside view
    Electric controller

    Inside view
    Magnetic limit switch
    internal view

    Inside view
    252Spring limit switch
    internal view

    Gear rack
    • 1005*30*12mm
    • Module = 4
    • Galvanized
    • 4 pcs/carton
    Address: Room1621 Linqiao Piazza, Ningbo City,315010, China
    Tel: +86(574) 27861829   27861849   27861830   Fax: +86(574)87264906
    E-mail: admin@blunet.net.cn
    Copyright ©1995-2003 DSW Electronics Ltd. All rights reserved.RSS Feeds