| Sensor:Photo semiconductor shock sensor |
| Processor:Microprocessor controlled |
| Alarm Relay Output:Normally closed contact, opens on alarm |
| Alarm Relay Rating:100mA 12V, 30 ohm resistor in series |
| Sensitivity Setting:Manual setting:by rotary VR setting continuously |
| Warm Up Time:Immediately |
| Anti False Alarm Pulse Count:3 seconds |
| Tamper Switch:Normally closed, open upon lid removal |
| Tamper Rating:100mA at DC12V |
| Indication:Red LED indicating Alarm |
| Alarm Duration:2 seconds |
| Supply Voltage:DC8-15V |
| Normal Current:11mA at DC12V |
| Alarm Current:17mA at DC12V |
| Operating Temperature:-20 to 500C |
| Casing:Fire resistance white PVC |
| Dimension(WxHxD):26x85x24mm |
| Weight:50 g |
|
|
