F-100 Series Manual pull station

Call Point

manual pull station,fire pull station

  • The single action pull station shall be DSW’s F-100 Series.
  • The unit shall be constructed of extruded aluminium
  • finished in red enamel paint to provide quick identification. 
  • Pulling the handle shall initiate immediate operation of the alarm detection circuit.
  • cart
  • Pulling on the station’s handle will release the internal switch to trigger the alarm detection circuit.

Attractive  and  durable,  DSW’s  F-100  Series of  pull  stations  provide  manual  fire  reporting.  The F-100 Series pull stations are non-coded, single or double action devices which initiate an alarm when pulled. Resetting is accomplished by inserting a 1/8” screwdriver from the front. The handle, once pulled will remain open and cannot be reset without utilizing the screwdriver.


The F-100 Series pull stations are constructed of durable  aluminium  and  finished  in  red. An  abrasion resistant label with large, raised letters provides clear legible instructions.

Customers who bought this product also purchased: